The Fluorescence Immunoassay Analyzer can be operated by commands on touchscreen.
1 System Installation
1) Connect power with analyzer through the DC adapter, press the power switch to turn on the analyzer.
2) After starting the analyzer, the initializing screen will display.
Note: If the initializing failed, it is recommended to contact the manufacturer or the local distributor.
3) After initializing, the main interface will display.
This is the main operation interface of the analyzer. Here you can choose the Test, Test Items, History and Settings
2 Settings
Tap "Settings" to display the secondary menu in the interface. System Settings
1) Tap "Time" to enter the year, month, day, hour, minute, second and tap "Set" to modify the system time. Tap "Time zone" to adjust the UTC time.
2) Tap "Language" to select the corresponding language, and tap "OK" to switch the system language.
3) Tap "Net Set" to enter the interface. and tap "WiFi" to enter the interface below for wifi settings. Tap the "WLAN Switch" and choose the WLAN you need in the "Valid WLAN list". Then enter the password.
4) Tap "Port Set" to enter the interface.
Generally the default serial port is connected to the LIS. If it is used to connect to a scanner or PC, leave LIS port unchecked and then check the appropriate option.
5) Tap "Backlight" to adjust the brightness of the display. Tap "LIGHTEN" or "DIM" to adjust the screen brightness.
6) Tap "About" to enter the interface for more information related to the analyzer. The Software Version and Serial Number are displayed on the
screen.
Maintenance
Basic maintenance is to keep the outside of the Fluorescence Immunoassay Analyzer clean.
External cleaning and maintenance method: Clean the outer surface of the analyzer with a damp cloth with no more than 70% alcohol. Do not use strong bleach (≥ 0.5% bleach solution), because oxidizing substances and solvents may damage the parts of analyzer and touch screen. Do not clean any internal parts and inner surface.
